What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 02.07.2025 15:30
Upvotes:
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Edit 2024–10.
Much-Deserved Success Arrives For 3 Zodiac Signs On June 24, 2025 - YourTango
What is lightning?
(Dc diagram shown, AC is similar).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
These are simplified answers to the original question, and does not change anything I wrote above.
There are three different concepts here that are getting confused.
2024–10–10[John johnson John Johnson ]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
At least they know the answer if they wanted it.
What does a fuse do?
For this case there are devices called Metal oxide varistors (MOV).
But it can get overloaded, and no longer works.
The 10-Year Auction and Inflation Data Could Jolt the Bond Market - Barron's
nine
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This one hit behind the barn.
Phillies Place Bryce Harper On 10-Day IL Due To Wrist Inflammation - MLB Trade Rumors
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
the problem then depends on "how fast does the fuse operate?".
Israel recovers bodies of three dead hostages from Gaza - BBC
One is “what exactly is in a ‘surge protector’ ? ”
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
NASA plans to build a giant radio telescope on the 'dark side' of the moon. Here's why. - Yahoo
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is 'the assistant's answer'
A fuse is a non-resetable over current circuit protector.
The MOV will conduct when the voltage exceeds 50% of line voltage.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
but this device (an Inductor) … impedes the rapid changes in the current.
In schematic diagrams this is the symbol for a fuse:
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
[image of Common-mode choke]
At one ohm, the resistor has a maximum of 1 watt power.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
It seems Mohan does not understand the difference between a comment and an Answer.
A circuit breaker is similar, but is resettable.
Now when you have a certain ac resistance, then a current flows in a loop.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
what exactly is a ‘surge’ protector?
2024–10–16 [ OO OLAOYE OYEBODE ]
It also is a device that limits the change in current flow.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
He then describes Rainy Season and Lightning.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
I post the exact comment here.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The third is lightning and “how it gets conducted into a home.”
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
[old diagram got deleted by accident]
Here is a simplified AC power diagram.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
but I think this circuit , shows a few more pieces.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Barnstars:
He then asserts :
First Sentence:
There are two important concepts here.
But… the neutral is now “floating” because of the 1 ohm resistance.
One
The bolt then partially travels down the line to your home.
This device then solves the entire problem.
An AC voltage/ current source, and an ac inductive load.
so, what happens?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
He then describes the function of a fuse.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
These devices are installed between the “hot” and “neutral” and protective ground.
This is where the MOV conducts again, and dissipated the energy.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
a photo is worth a thousand words.
eight
This is where this question deviates from being a 'generic' question, and becomes more specific.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The other is “what does a “fuse” do?”
So, the voltage could go up to 500 volts, and the fuse will not open up.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
2024–10–14 [Omar Gharbi Omar Gharbi ]